USED RESISTANCE SPOT WELDERS AND MIG WELDERS

Data Welder offers previously owned equipment which has been fully inspected, and refurbished. These spot welders and spot guns are in excellent working condition. All used equipment comes with a 6 month warranty.

WONDER WELDER REFURBISHED BASIC UNITS  * STANDARD FITTINGS INCLUDED                  Click on the photos for larger view. PHOTO MODEL FEATURES PRICE TS-8000R SINGLE-PHASE   8000A / 28 KVA TRANSFORMER with 7 ft. Welding Cables. Weld Thickness:  4mm (4 x 19 ga.) Advanced model with multiple functions including two-sided and single-sided spot welding pulling jobs using pins and washers, patch work, shrinking and tension correction, hole filling, and bolt & nut welding. It features built-in DCC electronic circuit for welding through painted surfaces. $2,450.00 TS-8500R THREE-PHASE   8500R / 20 KVA TRANSFORMER with 7 ft. Welding Cables. Weld Thickness:    Double sided: 4mm (4x19 ga.)    Single sided: 1mm (19 ga.) Maximum output power is achieved with the large cut core transformer.  This multi-purpose machine uses DCC circuit, making it possible to weld through painted surfaces. Offers eight welding functions. $2,400.00 TS-16000 THREE-PHASE 16000A / 28 KVA TRANSFORMER with 10 ft. Welding Cables Weld Thickness:  6mm (3 x 14 ga.) This model is capable of welding a maximum thickness of 6mm for two-sided spotwelding. The controlled power allows for spotwelding from thin sheet thick sections which is especially useful for chassis welding operations. $3,900.00 TS-16000GR THREE-PHASE   16000A / 28 KVA TRANSFORMER with 10 ft. Welding Cables Pre-Heat and Soft-Start Functions Weld Thickness:  6mm (3 x 14 ga.) Best-selling , hi power multi-purpose two-sided spot welder. The controlled power enables you to do various jobs ranging from washer stud to frame spotwelding under the best possible conditions. $4,600.00 TS-20000GR THREE-PHASE   20000A / 36 KVA TRANSFORMER with 10 ft. Welding Cables Pre-Heat and Soft-Start Functions Weld Thickness:  7.5mm (3 x 12 ga.) Spotwelding capacity has been heightened to a great extent with this NEW generation of portable type welder. Even with it's higher output, the warming-up function prevents such troubles as hole generation. $4,900.00  * Data Welder STANDARD FITTINGS    2 Single-Sided Tips, Stitch Blade, Washer, Tab & Pin Adapter, Carbon Rod for Heat    Shrinking Larger Area, Shrink & Fil Tip, Ground Plate and Copper Plated Washers   REFURBISHED AROMASTER II SPOT WELDER - COMPLETE UNIT AROMASTER II THREE-PHASE     AROMASTER II / 30 KVA TRANSFORMER with 4 cable system, Pincer Gun and single-sided Pistol Gun on seperate set of cables. Weld Thickness:  6mm (2 x 11 ga.) Microprocessor Control Datasheets:   AROMASTERII.PDF   AROMASTERII-1.PDF $5,900.00 REFURBISHED HIRANE RESISTANCE SPOT WELDERS HIRANE AUTO SPOTTER AS-100PHR 2 PHASE   Hirane Auto Spotter AS-100PHR 2-phase, 220V with Peumatic Spot and 2 ea. Arm set. Manual Spot Gun with 700mm (27.5”) Straight Arm set, Leather covered, Single Sided Attachment, Slide Hammer. Input Voltage: 208/232 Phases: Two Phases Fuse Rating (Amps): 50 Frequency: 50/60Hz Max Output (KVA): 22 Duty Cycle: 5% Work Cables: 8 feet Dimensions: 36 X 18 X 16 Weight: 255 lbs. Refurbished with 6 month warranty.   $6,900.00 REFURBISHED 11M DATALINER/DAMIEN RESISTANCE SPOT WELDERS 11M Dataliner/Damien SINGLE-PHASE     REFURBISHED 11M DATALINER/DAMIEN RESISTANCE SPOT WELDERS 200/220V, 2-phase. Includes Pincer gun with 4 Weldings arm sets & Single Pistol Spot gun on separate cables. Slide hammer & single sided attachment. Operation Manual. WINDING: Copper SUPPLY:  240V ELECTRICAL BREAKER: 60 Amps, Slow MAX WELDING CURRENT: 11,000 Amps OPEN VOLTAGE:  6-10 Volts WELDING THICKNESS:    Double Sided Gun 3+3 mm    Single Sided Gun 1.5 mm CABLE LENGTH:    Double Sided Gun 2 m    Single Sided Gun 1.7 m SETTINGS:  Digital TIME SETTINGS: 1/10 of a second DOUBLE SIDED GUN:  Air Operated COOLING SYSTEM DOUBLE SIDED GUN:     Automatic Air Cooled SINGLE SIDED GUN:    Automatic Air Cooled COPPER CABLES: Automatic Air Cooled COPPER ARMS & ELECTRODES:     Automatic Air Cooled TRANSFORMER: Fan Cooled Refurbished 6 month warranty.   $5,000.00 REFURBISHED SAITEK INVERTER SPOT WELDERS SAITEK INVERTEX E-1 SINGLE AND THREE PHASE     SAITEK INVERTEX E-1 with 2 sets of 7.3 ft. air cooled welding cables. Includes 5 arm sets, Slide hammer, pulling tips, Welding Washers, Threaded Studs,Welding nut. Shunt Clamp and Instruction Manual. You will need a 60A breaker(single-phase & Three phase). Single and three phase. 220Volts Weld Thickness : 2mm (3 X 14 ga.) Refurbished with 6 month warranty. Weight 300 lbs. $7,200.00 SAITEK INVERTEX Z-1 RESISTANCE SPOT WELDER 2 PHASE/3PHASE     SAITEK INVERTEX Z-1 With pneumatic pincer gun with 8 welding arm sets and single sided pistol gun on 10 foot separate cable sets. Includes Slide hammer, pulling tips, Welding washers, Threaded studs, Welding nuts, Shunt Clamp and Instruction Manual. You will need a 70A breaker(3-phase) with a 60A outlet. Refurbished with 6 month warranty. Weight 300 lbs $10,000.00

DATA WELDER REFURBISHED SPOT GUNS                Click on the photos for larger view. PHOTO MODEL FEATURES PRICE M-558TR HASUNA AIR GUN with Teflon Coated Arms** Smooth Operation through Air Power $995.00 YA-2TR YASHIMA AIR GUN with Teflon Coated Arms** $1,195.00 ** TELFON COATED WELDING ARMS    The Welding Arms are Telfon Coated in order to avoid electric shortening causing sparks    and burn through. NEW!! Data Welder TUNGCORE Welding Tip System Our new TUNGCORE tips have a 1/4" insert of a hard alloy center rod.   This prevents the tips from mushrooming and they last 10 times longer than regular copper tips. Due to the higher resistance and the size of the rod the weld will be 6mm every time! Our Cylindrical Solid-Type Cutter Blade with a 1/4" center hole will cut down the copper electrode around the tungsten rod after it wears down. The TUNGCORE tip comes flat and should be maintained this way with a file.

OPTIONS for REFURBISHED EQUIPMENT MODEL FEATURES PRICE DW-530 BUILT-IN AIR SUPPLY / COOLING SYSTEM for Pneumatic Spot Gun and Welding Cables. Includes:  Air Regulator / Filter, Air Flow Valves, and Reinforced Nylon Tubing. Fits all Wonder Welder Models $995.00 DW-500 ERGONOMIC KIT Includes:  Boom, Balancer & Wheel Plate $695.00 DW-300-3 FRONT TOOL BOX (for use with Ergonomic Kit) $97.50 DW-100 ACCESSORY HOLDER (for use with Ergonomic Kit) $98.00 DW-200G ORGANIZER for TIPS & ARMS (for use with Ergonomic Kit) $148.00 YAU-10 10" EXTENSION U-ARM $478.25 YAU-20 20" EXTENSION U-ARM $543.60 YAU-100 ADAPTER for U-ARM $348.00 DW-SEM TRAINING AND CERTIFICATION A half-day Certified on-site training seminar based on Data Welder's Advanced Welding Techniques and Procedures. $1,000.00