|
PART 1: Theory for Squeeze Type Resistance Spot Welding (S-TRSW),
Preparation, Pressure, Welding Time & Current
..
PART 2: Instructions and Hands-On Practice:
A) Double Sided Spot Welding through Primer & Glue. "Weld Bonding"
- Panels, Steel & Aluminum
- Wheel House / Grounding of Inner Wheel House
- Window & Door Openings
- Roof Panels with Drip Rail
- Floors / Open Channels to Floor Panels
- Hard-to-reach Areas
- Door Skins
|
|
B) Single-Sided Spot Welding (without Spot Gun)
- Panels / Non-Structural Areas
- Stitch Welding / Edge Sealing / Reinforcement
- Bolts & Nuts
- Washers, Tabs & Wiggle Wire (Sheet Metal Repair)
- Shrinking / High Spots (Sheet Metal Repair)
- Patching / Hole Filling (Sheet Metal Repair)
- Direct Weld Dent Pulling (Sheet Metal Repair)
|
|
PART 3: Sheet Metal
Sheet Steel 14 - 27 gauge (2.0 - 0.4mm)
Galvanized Steel 14-27 gauge (2.0mm - 0.4mm)
Stainless Steel 26 gauge (0.4mm)
Aluminum 16 gauge (1.5mm)
|
